LNG运输船BOG处理技术发展与演化路径研究

LNG运输船具有良好的发展前景，BOG的妥善处理是LNG燃料运输船安全航行的重要环节。通过专利数据挖掘与数据分析技术，归纳全球LNG运输船BOG处理领域的焦点技术和前沿技术，并且结合专利文本信息梳理出BOG处理技术的演化路径。研究结果发现，BOG处理领域内专利申请集中在回收利用方式、再液化装置及再液化处理方式三个方面。企业在今后发展中应针对涡轮布雷顿制冷技术进行重点研发和专利布局。     

神朔铁路钢轨折断风险评估模型研究

钢轨折断是一类严重的线路故障,研究钢轨折断风险评估对保障线路安全具有重要作用。基于模糊推理方法构建钢轨折断风险评估模型,该模型利用设备台账数据、钢轨状态检测数据和维修数据等相关的生产数据,识别钢轨折断致灾因子,量化评定致灾因子状态,建立模糊推理规则库,利用Mamdani模糊推理算法计算钢轨折断风险事件发生的可能性。最后采用神朔铁路神木北至黄羊城区间2013~2015年共3年的实际生产数据对模型的有效性进行验证,结果表明:所建模型可以较好地评估神朔铁路钢轨折断风险事件发生的可能性,对钢轨折断风险管理具有重要指导意义。     

基于新型冠状病毒传播机理的交通出行易感度研究

为科学判断各交通方式出行过程中人群感染病毒的风险概率进而有效控制病毒传播，借助空气传染病模型，根据已发布的新型冠状病毒传播机理，构建了交通出行的病毒易感度评估模型，模型包含对病毒传播有重要影响的通风、载客密度、暴露时间等主要参数。选用各种运输方式中有代表性的运载工具进行不同假设情景下的易感度评估，结果表明，在各种有效防控措施均得以采用的情景下，乘坐交通工具的易感度相比高危情景降低97%以上，相比基准情景降低93%以上。研究可为交通领域的科学防疫、精准施策提供依据。     

解读铁总企标《CTCS-3级列控系统总体技术规范》

介绍铁总企标《CTCS-3级列控系统总体技术规范》(Q/CR661-2018)的编制背景、主要技术内容,并重点解读有关新标准与原规范具有较大差异的主要技术变更项,最后提出未来改进方向。     

京张高铁北京北动车所上跨轨道交通13号线防护刚构设计

随着城市轨道交通建设快速发展,新建铁路与轨道交通交叉跨越越发频繁,为更好解决此类工程防护问题,结合京张高铁北京北动车所上跨北京市轨道交通13号线交叉工程,对铁路跨越既有轨道交通的防护刚构的进行研究。针对跨越工点,利用MIDAS等有限元软件建立防护结构有限元模型,对比选取不同基础刚度,分析研究防护刚架各设计参数,进行结构配筋并提出设计注意事项;另外,利用ANSYS软件建立全场地模型,对结构整体施工工序进行模拟,提取变形、应力等重要结果,进行跨越防护方案专项安全评估,论证防护方案的可靠度及可行性。     

Sources and exposure risk of trace elements for traffic policemen in roadside locations

Samples of PM_2.5 and PM₁₀ at four types of roadside location (major road, secondary road, branch road, and expressway) in Tianjin were collected and analyzed in 2015. The average annual roadside PM_2.5 and PM₁₀ concentrations were higher than the national ambient air quality standard (NAAQS: GB3095-2012). The chromium (Cr), manganese (Mn), nickel (Ni), zinc (Zn), arsenic (As), and cadmium (Cd) concentrations in both PM_2.5 and PM₁₀ over four seasons displayed significant differences (p < 0.05). An enrichment factor (EF) analysis revealed that Cd, copper (Cu), Zn, As, Ni, and Pb in PM_2.5 and PM₁₀ mainly originated from anthropogenic sources. A factor analysis (FA) and correlation analysis (CA) revealed that vehicle emissions (exhaust and non-exhaust), soil dust, coal combustion, and industrial emissions were the main sources of roadside PM_2.5 and PM₁₀ in Tianjin. Both the total hazard quotients (total HQ) and the total carcinogenic risk (total CR) for selected elements in PM_2.5 and PM₁₀ were within acceptable limits. The HQ of Pb was higher than for other metals, and it should therefore be given special attention. The CR for traffic policemen was highest for Cr exposure (1.01 × 10⁻⁵ for PM_2.5 and 1.52 × 10⁻⁵ for PM₁₀), followed by As and Ni. A sensitivity analysis showed that the total contributions of the metal concentrations, exposure time (ET), and exposure frequency (EF) accounted for over 50% of the risk for Cr, As, and Ni, suggesting that these metals had the greatest impact on the uncertainty of health risk assessments.     

自装卸式驮背多功能运输车及关键技术

介绍了自装卸式STX₁/STX₂型驮背多功能运输车的主要技术参数、结构配置及适应的装载工况,阐述了该车的关键技术和站场配套要求。     

探讨危旧桥梁加固的有关技术问题

随着国家经济建设脚步的加快,路桥的建设技术也在不断的进步,危旧桥梁的加固处理也成为桥梁建设的热点话题之一。因为公路车流量的增多,在上世纪末建设的桥梁一直都存在过载使用的问题,过多的重型车辆对危旧桥梁的使用也是一项巨大的考验。在一些使用年限比较久的桥梁中,出现了桥体老化现象。本文就危旧桥梁加固的有关技术问题进行了探讨。     

Traffic modelling in system boundary expansion of road pavement life cycle assessment

This paper uses a case study of a UK inter-urban road, to explore the impact of extending the system boundary of road pavement life cycle assessment (LCA) to include increased traffic emissions due to delays during maintenance. Some previous studies have attempted this but have been limited to hypothetical scenarios or simplified traffic modelling, with no validation or sensitivity analysis. In this study, micro-simulation modelling of traffic was used to estimate emissions caused by delays at road works, for several traffic management options. The emissions were compared to those created by the maintenance operation, estimated using an LCA model. In this case study, the extra traffic emissions caused by delays at road works are relatively small, compared to those from the maintenance process, except for hydrocarbon emissions. However, they are generally close to, or above, the materiality threshold recommended in PAS2050 for estimating carbon footprints, and reach 5–10% when traffic flow levels are increased (hypothetically) or when traffic management is imposed outside times of lowest traffic flow. It is recommended, therefore, that emissions due to traffic disruption at road works should be included within the system boundary of road pavement LCA and carbon footprint studies and should be considered in developing guidelines for environmental product declarations of road pavement maintenance products and services.     

Stakeholder Perspectives on the Value of Marine Spatial Planning Towards Advancing Offshore Wind in the U.S.

The United States contributes only 0.2% of the 18,814?MW of global installed offshore wind capacity. Lack of development has been attributed in part to a cumbersome regulatory process that includes the evaluation of environmental impacts. Assessments are based on biological, social, and technical data that are often incomplete. Marine spatial planning (MSP) may help fill data gaps. We conducted semi-structured interviews with key informants to understand (1) whether a lack of biological data impedes offshore wind environmental assessments, (2) whether MSP could mitigate these impediments, and (3) whether MSP could advance offshore wind development in the U.S. in other ways. Most informants stated that a lack of biological data in offshore wind environmental assessments was problematic due to incomplete data, uncertainty of data, and mismatched scales. Data issues may be mitigated by creation of data products and increased communication, outcomes of MSP that may benefit the regulatory process by increasing data availability, resolving conflicts among users, and providing a common operating picture. Challenges remain in integrating MSP into the processes of siting and permitting offshore wind, but it provides a strategic framework for the systematic identification, collection, collation, analyses, application, and management of data in the offshore wind environmental regulatory process.